Journal of Engineering Materials and Technology 1993 |
Title | Subject | Authors |
A comparative study of the creep rupture properties of type 316 stainless steel base and weld metals. | Science and technology | Mathew, M.D., Sasikala, G., Mannan, S.L., Rodriguez, P. |
A comparison of the strains due to edge cracks and cuts of finite width with applications to residual stress measurement. | Science and technology | Cheng, W., Finnie, I. |
A micromechanics based representation of combined mode I and II toughness ofbrittle materials and interfaces. | Science and technology | Ahmad, J. |
An engineering approach to determine the fatigue life of sheet structures under cyclic loading. | Science and technology | Toribio, J., Valiente, A. |
An experimental study on the effect of prior plastic straining on creep behavior of 304 stainless steel. | Science and technology | Xia, Z., Ellyin, F. |
Boundary-value problem for viscoelastic creep in deeply imbedded salt vaults. | Science and technology | Wei Xu, Genin, Joseph |
Compression failure in reduced adhesion fiber laminates. | Science and technology | Swanson, Stephen R., Colvin, Glenn E. |
Compression fatigue response for carbon fiber with conventional and toughened epoxy matrices with damage. | Science and technology | Swanson, S.R., Cairns, D.S., Guyll, M.E., Johnson, D. |
Compressive failure of fiber composites: the roles of multiaxial loading and creep. | Science and technology | Slaughter, W.S., Fleck, N.A., Budiansky, B. |
Cyclic fatigue-crack growth in grain bridging ceramics. | Science and technology | Dauskardt, Reinhold H. |
Delamination in thickness tapered composite laminates. | Science and technology | Tretheway, B.R., Jr., Gillespie, J.W., Jr., Wilkins, D.J. |
Effect of bulk deformation on viscoplastic adhering process- a numerical study of solid state pressure welding. | Science and technology | Takahashi, Y., Koguchi, T., Nishiguchi, K. |
Effect of fiber reinforcement on dynamic crack growth in brittle matrix composites. | Science and technology | Khanna, Sanjeev K., Shukla, Arun |
Effect of turbulent heat transfer on continuous ingot solidification. (Papers on Heat and Mass Transfer in Solidification Processing) | Science and technology | Shyy, W., Pang, Y., Hunter, G.B., Wei, D.Y., Chen, M.-H. |
Elastic-plastic response of sintered porous iron under uniaxial strain cycling. | Science and technology | Kim, K.T., Kwon, Y.S. |
Finite element analysis of whisker-reinforced SiC/Al composites subjected tocryogenic temperature thermal cycling. | Science and technology | Levy, A., Papazian, J.M. |
Finite element simulations of fiber pull-out. | Science and technology | Povirk, G.L., Needleman, A. |
Flow effects on the solidification environment in a GTA spot weld. (gas-tungsten arc) (Papers on Heat and Mass Transfer in Solidification Processing) | Science and technology | Bertram, L.A. |
Freezing characteristics along a horizontal cooled tube immersed in aqueous binary solution with main flow. (Papers on Heat and Mass Transfer in Solidification Processing) | Science and technology | Yamada, M., Fukusako, S., Tago, M., Horibe, A. |
Heat transfer effects during solidification of semicrystalline polymers. (Papers on Heat and Mass Transfer in Solidification Processing) | Science and technology | Erhun, M., Advani, S.G. |
High strain rate deformation and damage in ceramic materials. | Science and technology | Raiser, G., Clifton, R.J. |
High temperature fracture toughness in silicon nitride and sialon. | Science and technology | Mutoh, Y., Miyahara, N., Yamaishi, K., Oikawa, T. |
High temperature low-cycle fatigue of friction welded joints-type 304-304 stainless steel and alloy 718-718 nickel base superalloy. | Science and technology | Wakai, T., Sakane, M., Ohnami, M., Okita, K., Fukuchi, Y. |
In-situ compressive strength of carbon/epoxy AS4/3501-6 laminates. | Science and technology | Swanson, S.R., Colvin, G.E., Jr. |
Integrated simulation of fluid flow and heat transfer in injection molding for the prediction of shrinkage and warpage. (Papers on Heat and Mass Transfer in Solidification Processing) | Science and technology | Himasekhar, K., Wang, K.K., Chiang, H.H., Santhanam, N. |
Issues in thermal contact and phase change in porosity prediction. (Papers on Heat and Mass Transfer in Solidification Processing) | Science and technology | Huang, H., Suri, V.K., Hill, J.L., Berry, J.T. |
Machinability of fiber-reinforced thermoplastics drilling. | Science and technology | Hocheng, H., Puw, H.Y. |
Methodology to predict delayed failure due to slow crack growth in ceramic tubular components using data from simple specimens. | Science and technology | Jadaan, O.M., Tressier, R.E. |
Modeling of viscoplastic adhering process by a finite element technique. | Science and technology | Takahashi, Y., Koguchi, T., Nishiguchi, K. |
Notch ductile-to-brittle transition due to localized inelastic band. | Science and technology | Suo, Z., Ho, S., Gong, X. |
Numerical simulation of the coinjection molding process. (Papers on Heat andMass Transfer in Solidification Processing) | Science and technology | Wang, K.K., Turng, L.S., Wang, V.W. |
On the solid-fluid transition zone in welding analysis. (Papers on Heat and Mass Transfer in Solidification Processing) | Science and technology | Chen, Y., Sheng, I.C. |
Parameter evaluation for a unified constitutive model. | Science and technology | Senseny,P.E., Brodsky, N.S., DeVries, K.L. |
Production of a finely dispersed AlPb-coating. (Papers on Heat and Mass Transfer in Solidification Processing) | Science and technology | Berrenberg, Th., Steinbach, I., Rommerskirchen, M., Mergen, R. |
Role of crack wake toughening on elevated temperature crack growth in a fiber reinforced ceramic composite. | Science and technology | Nair, Shantikumar V., Tsung-Ju Gwo |
Stable crack growth in ceramics at ambient and elevated temperatures. | Science and technology | Pastor, J.Y., LLorca, J., Planas, J., Elices, M. |
Stable crack growth in rate-dependent materials with damage. | Science and technology | Fager, Leif-Olof, Bassani, J.L. |
Stochastic aspects of matrix cracking in brittle matrix composites. | Science and technology | Spearing, S.M., Zok, F.W. |
Stress intensity factors for multiple cracks in an adhesively bonded sandwich sheet. | Science and technology | Nishimura, T. |
Test machine and control system interactions in the evaluation of rate-independent metal flow. | Science and technology | Brown, S.B., Dave, V.R. |
The influence of grain size on the toughness of monolithic ceramics. | Science and technology | Bower, A.F., Ortiz, M. |
Thermal-induced transformation of retained austenite in the simulated case of a carburized steel. | Science and technology | Neu, R.W., Sehitoglu, Huseyin |
The variable threshold rod experiment: a comparison of measured and computed deformations. | Science and technology | Follansbee, P.S., Dawson, P.R. |
Time dependent fracture and cohesive zones. | Science and technology | Knauss, W.G. |
Toughening mechanisms in quasi-brittle materials. | Science and technology | Shah, S.P., Ouyang, C. |
Ultrasonic assessment of interfacial oxidation damage in ceramic matrix composites. | Science and technology | Chu, Y.C., Rokhlin, S.I., Baaklini, G.Y. |
Viscoplastic behavior and modelization of an austenitic stainless steel (17-12 SPH) at high temperature (T=600 degrees C), under in and out of phase cyclic tension-torsion loading. | Science and technology | Delobelle, P., Lachat, R. |
Yield and flow behavior of initially anisotropic aluminum tube under multiaxial stresses. | Science and technology | Takeda, Takenobu |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible.