| Journal of Engineering Materials and Technology 1998 |
| Title | Subject | Authors |
|---|
| A consistent criterion for diffuse necking in sheet metals using Hill's 1979 yield surface. | Science and technology | Esche, S.K., Shivpuri, R. |
| A constitutive model for powder materials. | Science and technology | Cristescu, N.D., Jin, Jishan |
| A finite element analysis of the effect of hardening rules on the indentation test. | Science and technology | Huber, N., Tsakmakis, Ch. |
| A method for damage evaluation of laminated composite materials by using model updating techniques in dynamics. | Science and technology | Cunha, Jesiel, Perreux, Dominique |
| Analysis of forming limits using the Hill 1993 yield criterion. | Science and technology | Chandra, Abhijit, Xu, Siguang, Weinmann, Klaus J. |
| An experimental study of ratchetting during indentation of 316L stainless steel. | Science and technology | Kaszynski, P., Ghorbel, E., Marquis, D. |
| An inelastic constitutive equation of fiber reinforced plastic laminates. | Science and technology | Murakami, S., Kanagawa, Y., Mizobe, T. |
| An investigation of thin-film coating/substrate systems by nanoindentation. | Science and technology | Li, Jackie, Thostenson, Erik T., Chou, Tsu-Wei, Riester, Laura |
| Applicability of Neuber's rule to the analysis of stress and strain concentration under creep conditions. | Science and technology | Harkegard, G., Sorbo, S. |
| Application of the Taylor polycrystal plasticity model to complex deformation experiments. | Science and technology | McDowell, D.L., Butler, G.C., Graham, S., Stock, S.R., Ferney, V.C. |
| A simplified model.(Modeling of High Homologous Temperature Deformation Behavior Using the Viscoplasticity Theory Based on Overstress (VBO), part 3) | Science and technology | Krempl, Erhard, Tachibana, Yukio |
| A simulation procedure for panel age forming. | Science and technology | Foroudastan, S., Narimetla, S.P., Peddieson, J., Jr., Buchanan, G.R. |
| A three-dimensional network model for a low density fibrous composite. | Science and technology | Stahl, D.C., Cramer, S.M. |
| Automatic simulation of a sequence of hot-former forging processes by a rigid-thermoviscoplastic finite element method. | Science and technology | Shivpuri, Rajiv, Joun, M.S., Moon, H.K. |
| Cyclic deformation and fatigue of a TiNi shape-memory alloy wire subjected to rotating bending. | Science and technology | Hashimoto, T., Tobushi, H., Hachisuka, T., Yamada, S. |
| Cyclic fatigue experiments and analysis of silicon nitrides - stepwise loading. | Science and technology | Chiu, Y.P. |
| Damage accumulation mechanisms in thermal barrier coatings. | Science and technology | Newaz, G.M., Nusier, S.Q., Chaudhury, Z.A. |
| Damage in composite NiMH positive electrodes.(nickel metal hydride) | Science and technology | Sastry, A.M., Choi, S.B., Cheng, X. |
| Easy-to-compute tensors with symmetric inverse approximating Hencky finite strain and its rate. | Science and technology | Bazant, Zdenek P. |
| Elastic constants of single crystal Hastelloy X at elevated temperatures. | Science and technology | Jordan, Eric H., Canistraro, Howard A., Shixiang, Shi, Favrow, Leroy H., Reed, Francis A. |
| Evaluation of creep-fatigue life prediction methods for low-carbon nitrogen-added 316 stainless steel. | Science and technology | Takahashi, Yukio |
| Evaluation of tensile strength of multistrand conductors - Part 1: Theoretical basis. | Science and technology | Lanteigne, J., Akhtar, A. |
| Evaluation of tensile strength of multistrand conductors - Part II: Experimental results. | Science and technology | Akhtar, A., Lanteign, J. |
| Experimental characterization of crack tip deformation fields in alloy 718 at high temperatures. | Science and technology | Sutton, Michael, Liu, Jin, Lyons, Jed, Reynolds, Anthony |
| Inelastic response of off-axis MMC lamina. (metal matrix composite) | Science and technology | Zhang, Ke, Newaz, G.M. |
| Investigation of localized deformation in NiAl single crystals. | Science and technology | Kumar, Ashok V., Yang, Chulho, Seelam, Vijay B.R. |
| Local variations of strain and strain rate in roll bite region during rolling of steels. | Science and technology | Tseng, Ampere a., Wang, Shi R., Lau, A.C.W. |
| Matrix cracking with irregular fracture fronts as observed in fiber reinforced ceramic composites. | Science and technology | Hu, Kai X., Yeh, Chao-pin, Wyatt, Karl W. |
| Measuring strain distribution during mesoscopic domain reorientation in a ferroelectric material. | Science and technology | Park, S.B., Park, S.S., Carman, G.P., Hahn, H.T. |
| Mechanistic prediction of fracture processes in ferritic steel welds within the transition temperature regime. | Science and technology | Busso, E.P., Lei, Y., O'Dowd, N.P., Webster, G.A. |
| Modeling of GMA weld pools with consideration of droplet impact.(gas metal arc) | Science and technology | Cao, Zhen Ning, Dong, Pingsha |
| Numerical Green's function for steady-state heat conduction in heterogeneous media. | Science and technology | Choi, Deok-Kee, Nomura, Siichi |
| Numerical simulation of residual stress caused by quenching process in aluminum gas cylinders. | Science and technology | Lam, Y.C., Ibrahim, R.N., Ischenko, D. |
| On the chemo-mechanical polishing (CMP) of Si3N4 bearing balls with water based CeO2 slurry. | Science and technology | Jiang, Ming, Wood, Nelson O., Komanduri, R. |
| Oxidation induced stress-rupture of fiber bundles. | Science and technology | Lara-Curzio, Edgar |
| Phase transformation temperatures of an ultra-low carbon steel. | Science and technology | Lenard, J.G., Hwu, Y.J. |
| Plastic energy dissipation model for lifetime prediction of zirconium and zircaloy-4 fatigued at RT and 400 degrees celsius. | Science and technology | Lin, Xiao, Haicheng, Gu |
| Prediction of extent of heat affected zone in laser grooving of unidirectional fiber-reinforced plastics. | Science and technology | Hocheng, H., Pan, C.T. |
| Rate data and material model parameter estimation. | Science and technology | Fossum, A.F. |
| Serrated flow and surface markings in aluminium alloys. | Science and technology | Li, Ming, Lege, Daniel J. |
| Shear strength of a thermal barrier coating parallel to the bond coat. | Science and technology | Cruse, T.A., Dommarco, R.C., Bastias, P.C. |
| Strain space formulation of the Armstrong-Frederick family of plasticity models. | Science and technology | Wang, Haiyang, Barkey, M.E. |
| Strength prediction of RTM single-lap joints with transverse stitching.(Resin Transfer Moulding) | Science and technology | Tong, Liyong |
| Study on the thermo-elastic-plastic cutting model for 3-D tool with chip breaker. | Science and technology | Lin, Zone-Ching, Zheng, Yan-Liang |
| Tensile and bending behavior of sintered alloys: experimental results and modeling. | Science and technology | Bertini, L., Fontanari, V., Straffelini, G. |
| Tension-torsion multiaxial low cycle fatigue of Mar-M247LC directionally solidified superalloy at elevated temperature. | Science and technology | Sakane, Masao, Ohnami, Masateru, Shirafuji, Nakao, Shimomizuki, Kenji |
| The burdened area as a structural indicator of interface bonding strength. | Science and technology | Luo, Y.F. |
| The numbers of elastic properties and failure parameters for fiber composites. | Science and technology | Christensen, R.M. |
| The single slice method for measurement of axisymmetric residual stresses in solid rods or hollow cylinders in the region of plane strain. | Science and technology | Cheng, Weili, Finnie, Iain |
| Unified constitutive equations of foam materials. | Science and technology | Song, Y., Chang, Fu S., Lu, D.X., DeSilva, C.N. |
| Viscoplastic collapse of thin-walled tubes under cyclic bending. | Science and technology | Pan, Wen-Fung, Her, Yung-Shun |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible.
