Journal of Engineering Materials and Technology 2007 |
Title | Subject | Authors |
A comparative study of formability of diode laser welds in DP980 and HSLA steels.(high strength low alloy) | Science and technology | Xia, M., Sreenivasan, N., Lawson, S., Zhou, Y., Tian, Z. |
A comprehensive theory of yielding and failure for isotropic materials. | Science and technology | Christensen, Richard M. |
A mathematical model competing failure modes in strain cycle fatigue. | Science and technology | Cashman, Gerald T. |
An approach for fatigue life prediction. | Science and technology | Fei Ding, Yangao Jiang, Miaolin Feng |
An equivalent orthotropic representation of the nonlinear elastic behavior of multiwalled carbon nanotubes. | Science and technology | Boyce, M.C., Pantano, A., Garg, M. |
A new method developed for brittle and ductile materials to evaluate mechanical properties of a lump specimen in the use of indentation test. | Science and technology | Pal Jen Wei, Jen Fin Lin |
An experimental determination of optimum processing parameters for Al/SiC metal matrix composites made using ultrasonic consolidation. | Science and technology | Y. Yang, Janaki Ram, G.D., Stucker, B.E. |
A simple analogous model for the determination of cyclic plasticity parameters of thin wires to model wire drawing. | Science and technology | Schenk, T., Seifert, T., Brehm, H. |
A theoretical study of the in vivo mechanical properties of angiosperm roots: constitutive theories and methods of parameter estimation. | Science and technology | Sadovsky, Alexander V., Baldi, Pierre F., Wan, Federic Y.M. |
Average strain in fiber bundles and its effect on NCF composite stiffness. | Science and technology | Varna, Janis, Mattsson, H. David |
Behavior of nonhomogenous materials subjected to bearing load. | Science and technology | Batra, Varun, Rousseau, Carl-Ernst |
Capability of a feed-forward artificial neural network to predict the constitutive flow behavior of as cast 304 stainless steel under hot deformation. | Science and technology | Mandal, Sumantra, Shivprasad, P.V., Venugopal, S. |
Characterization of elastoplastic properties based on inverse analysis and finite element modeling of two separate indenters. | Science and technology | Gamonpilas, Chaiwut, Busso, Esteban P. |
Characterization of the core properties of a shock absorbing composite. | Science and technology | Georgiades, G., Oyadiji, S.O., Zhu, X.Q., Wright, J.R., Turner, J.T. |
Chloride content effect on the corrosion fatigue properties of superduplex stainless steels. | Science and technology | Girones, A., Anglada, M., Mateo, A. |
Constitutive modeling of metals based on the evolution of the strain-hardening rate. | Science and technology | Durrenberger, L., Klepaczko, J.R., Rusinek, A. |
Determination of lower-bound ductility for AZ31 magnesium alloy by use of the bulge specimens. | Science and technology | Lapovok, Rimma, Hodgson, Peter D. |
Determining equi-biaxial residues stress and mechanical properties from the force-displacement curves of conical microindentation. | Science and technology | X. Chen, Karlsson, A.M., J. Yan |
Development and characterization of ductile Mg/Y2O3 nanocomposites. | Science and technology | Hassan, S.F., Gupta, M. |
Development and validation of novel FE models for 3D analysis of peening of strain-rate sensitive materials. | Science and technology | Meguid, S.A., Shagal, G., Stranart, J.C. |
Effect of interference on the mechanics of load transfer in aircraft fuselage lap joints. | Science and technology | Atre, Amarendra, Johnson, W.S. |
Effect of nozzle-traveling velocity on oil cavitation jet peening of aluminum alloy, AA 6063-T6. | Science and technology | Grinspan, A. Sahaya, Gnanamoorthy, R. |
Effect of strain rate on the dynamic hardness in metals. | Science and technology | Almasri, Amin H., Voyiadjis, George Z. |
Effects of molybdenum content and heat treatment on mechanical and tribological properties of a low-carbon Stellite alloy. | Science and technology | Ping Huang, Rong Liu, Xijia Wu, Yao, Matthew X. |
Effects of platelet size and mean volume fraction on platelet orientation and volume fraction distributions in functionally graded material fabricated by centrifugal solid-particle method. | Science and technology | Yamamoto, Tetsuya, Sequeira, P.D., Watanabe, Yoshimi, Eryu, Hiroyuki, Matusuura, Kiyotaka |
Effects of strain hardening and initial yield strength on machining-induced residual stresses. | Science and technology | Nasr, Mohamed N.A., Ng, E.G., Elbestawi, M.A. |
Evaluation of flow stresses of tubular materials considering anisotropic effects by hydraulic bulge tests. | Science and technology | Yeong-Maw Hwang, Yi-Kai Lin |
Evidence of ductile tearing ahead of the cutting tool and modeling the energy consumed in material separation in micro-cutting. | Science and technology | Subbiah, Sathyan, Melkote, Shreyes N. |
Experimental technique for elevated temperature mode I fatigue crack growth testing of Ni-base metal foils. | Science and technology | L. Liu, Holmes, J.W. |
Four phase model: A new formulation to predict the effective elastic moduli of composites. | Science and technology | Cherkaoui, M., Barhdadi, El H., Lipinski, P. |
Fracture characterization of woven fabric reinforced thermoplastic composites. | Science and technology | Zenasni, R., Bachir, A.S., Arguelles, A., Castrillo, M.A., Vina, J. |
Hole-drilling residual stress profiling with automated smoothing. | Science and technology | Schajer, Gary S. |
Hot deformation behavior of bearing steels. | Science and technology | Moon, Ho Keun, Yoo, Sun Joon, Lee, June Key, Lee, Jae Seong, Joun, Man Soo |
Initiation and propagation of stress-assisted corrosion (SAC) cracks in carbon steel boiler tubes. | Science and technology | Dong Yang, Singh, Preet M., Neu, Richard W. |
Low-velocity impact response characterization of a hybrid titanium composite laminate. | Science and technology | Ramulu, M., Bernhardt, S., Kobayashi, A.S. |
Manufacturing aspects relating to the effects of direct current on the tensile properties of metals. | Science and technology | Ross, Carl D., Irvin, David B., Roth, John T. |
Mechanical behavior of alloy AA6111 processed by severe plastic deformation: Modeling and experiment. | Science and technology | Estrin, Yuri, hee, KiHo, Lapovok, Rimma, Thomson, Peter F. |
Mechanical performance evaluation of cast magnesium alloys for automotive and aeronautical applications. | Science and technology | Pantelakis, G. Sp, Alexopoulos, N.D., Chamos, A.N. |
Microwave synthesis and characterization of magnesium based composites containing nanosized SiC and Hybrid (SiCAl2O3) reinforcements. | Science and technology | Gupta, Manoj, Thakur, Sanjay Kumar, Balasubramanian, K. |
Modeling of elastic waves in dynamically loaded NiAl bicrystals. | Science and technology | Loomis, Eric |
Modeling the influence of material structure on deformation induced surface roughening in AA7050 thick plate. | Science and technology | Miller, M.P., Turner, T.J. |
On serrated plastics flow in an AA5052-H32 sheet. | Science and technology | Nian Zhang, Wei Tong |
On the micromechanics-based simulation of metal matrix composite response. | Science and technology | Pindera, Marek-Jerzy, Bansal, Yogesh |
On the reference length and mode mixity for a bimaterial interface. | Science and technology | Agrawal, A., Karlsson, A.M. |
Optimization of material properties and process parameters for tube hydroforming of aluminum extrusions. | Science and technology | Loukus, Adam R., Subhash, Ghatu, Imaninejad, Mehdi |
Optimization of thermomechanical loading by inverse method. | Science and technology | Bogard, Virginie, Revel, Philippe, Hetel, Yannick |
Pressure sensitive nonassociative plasticity model for DRA composite. | Science and technology | Xin Lei, Lissenden, Cilff J. |
Relation between microscopic and macroscopic mechanical properties in random mixtures of elastic media. | Science and technology | Giordano, Stefano |
Residual stress solution extrapolation for the slitting method using equilibrium constraints. | Science and technology | Prime, Michael B., Schajer, Gary S. |
Stress-based springback reduction of a channel shaped auto-body part with high-strength steel using response surface methodology. | Science and technology | Huh, Hoon, Song, Jung-Han, Kim, Se-Ho |
Study on the drilling of titanium/graphite hybrid composites. | Science and technology | Ramulu, M., Kim, D. |
The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming. | Science and technology | Weiss, M., Dingle, M.E., Rolfe, B.F., Hodgson, P.D. |
Weld distortion control, during welding process with reverse-side heating. | Science and technology | Mochizuki, Masahito, Toyoda, Masao |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible.