Journal of Engineering Materials and Technology 1995 |
Title | Subject | Authors |
A constitutive model for commercially pure titanium. | Science and technology | Sheikh-Ahmad, J.Y., Bailey, J.A. |
A constitutive model for estimating multiaxial notch strains. | Science and technology | Lee, Yung-Li, Chiang, Yung J., Wong, Hang-Hong |
A method for the analysis of the growth of short fatigue cracks. | Science and technology | McEvily, A.J., Shin, Y.-S. |
A modeling investigation of thermal and strain induced recovery and nonlinear hardening in potential based viscoplasticity. | Science and technology | Saleeb, A.F., Arnold, S.M., Wilt, T.E. |
Analysis of mass transfer process in the pore free technique. | Science and technology | Bar-Meir, Genick |
A new approach to improve material models. | Science and technology | Braasch, H., Duddeck, H., Ahrens, H. |
A new perspective on the influence of thickness and post-weld heat treatment for large scale welded joints. | Science and technology | Hancock, P., Chubb, J.P., Spurrier, J. |
An experimental investigation of damage evolution in a ceramic matrix composite. | Science and technology | Ravichandran, G., Walter, M.E. |
An experimental investigation of resin flow sensing during molding processes. | Science and technology | Kikuchi, Akihisa, Higuerey, Evelitsa, Coulter, John |
An investigation of the effect of speeds of work rolls on rolling strip. | Science and technology | Y.C. Cheng, Zone-Ching Lin |
An investigation of the formability of long fiber thermoplastic composite sheets. | Science and technology | Lee, J.H., Vogel, J.H. |
An investigation of transient creep by means of endochronic viscoplasticity and experiment. | Science and technology | Han C. Wu, Chin C. Ho |
A nonlinear kinematic hardening model for elastoplastic deformations in grey cast iron. | Science and technology | Josefson, B.L., Stigh, U., Hjelm, H.E. |
A phenomenological model for intergranular failure by r-type and wedge-type cavitation. | Science and technology | Soon-Bok Lee, Miller, Alan K. |
ASME 1993 Nadai Lecture - elastoplastic stress and strain concentrations. | Science and technology | Sharpe, William N., Jr. |
Asymptotic approach to the Hill model of spread in rolling. | Science and technology | Domanti, S., McElwain, D.L.S., Middleton, R.H. |
Characterization of elevated temperature crack growth in Hastelloy-X using integral parameters. | Science and technology | K.S. Kim, Van Stone, R.H. |
Compressive fatigue of a plasma sprayed ZrO2-8 wt% Y2O3 and ZrO2-10 wt%NiCrAlCoY TTBC.(thick thermal barrier coatings) | Science and technology | Miller, R.A., Johnsen, B.P., Cruse, T.A., Brindley, W.J. |
Compressive stress-strain relations and shock Hugoniot curves of flexible foams. | Science and technology | Zaretsky, E., Ben-Dor, G. |
Constitutive equations for commercial-purity aluminum deformed under hot-working conditions. | Science and technology | Puchi, E.S. |
Corrosion fatigue of AZ91E-T6 cast magnesium alloy in a 3.5 percent NaCl aqueous environment. | Science and technology | Stephens, R.I., Schrader, C.D., Lease, K.B. |
Crack growth rate behavior of a titanium-aluminide alloy during isothermal and nonisothermal conditions. | Science and technology | Mall, S., Nicholas, T., Pernot, J.J. |
Creep and tensile behavior.(Modeling of High Homologous Temperature Deformation Behavior Using a Viscoplasticity Theory Based on Overstress (VBO), part 1) | Science and technology | Krempl, Erhard, Tachibana, Yukio |
Deformation analysis of simple-shear sheet specimens. | Science and technology | Fuh-Kuo Chen |
Effective elastic constants of superlattice films measured by line-focus acoustic microscopy. | Science and technology | Barnett, Scott A., Kim, Jin O., Achenbach, Jan D., Shinn, Meenam |
Effect of state of stress on compression failure in carbon/epoxy laminates. | Science and technology | Swanson, Stephen R., Yong Ju Jee |
Effect of surface asperity on interfacial contact process controlled by power law creep - numerical study of viscoplastic adhering process. | Science and technology | Takahashi, Y., Tanimoto, M. |
Elastic anisotropy effect of crystals on polycrystal fatigue crack initiation. | Science and technology | Teng, N.J., Lin, T.H. |
Elastic properties of particle-occlusion composites: measurements and modeling. | Science and technology | Ledbetter, Hassel, Datta, Subhendu, Dunn, Martin |
Elevated temperature axial and torsional fatigue behavior of Haynes 188. | Science and technology | Bonacuse, Peter J., Kalluri, Sreeramesh |
Experimental evidence of temperature path independence in the polycrystalline alloy Ni3Al. | Science and technology | Webb, G., Antolovich, S.D. |
Experimental study of interfacial contacting process controlled by power law creep. | Science and technology | Takahashi, Y., Tanimoto, M. |
Experimental techniques for dynamic characterization of composite materials. | Science and technology | Grief, Robert, Hebert, Benjamin |
Fatigue damage calculation using the critical plane approach. | Science and technology | Chu, C.-C. |
Fatigue design model based on damage mechanisms revealed by acoustic emission measurements. | Science and technology | Fang, D., Berkovits, A. |
Fatigue gage utilizing surface roughening of aluminum foil. | Science and technology | Nagase, Y., Sawaki, Y., Moritake, F., Yoshida, H. |
Fatigue life prediction in titanium matrix composites. | Science and technology | Nicholas, T. |
Fatigue-life prediction methodology using a crack-closure model. | Science and technology | Newman, J.C., Jr. |
Flow instability in the torsional straining of commercially pure titanium. | Science and technology | Sheikh-Ahmad, J.Y., Bailey, J.A. |
Fracture plane of cruciform specimen in biaxial low cycle fatigue - estimate by variance method and experimental verification. | Science and technology | Sakane, Masao, Ohnami, Masateru, Bedkowski, Wlodzimierz, Macha, Ewald |
From instability and time dependence on the microscale to stability and time independence on the macroscale. | Science and technology | Drucker, Daniel C. |
From micro- to macro-plasticity: the scale invariance approach. | Science and technology | Aifantis, E.C. |
Laminate delamination due to thermal gradients. | Science and technology | Hutchinson, J.W., Lu, T.J. |
Life prediction of notched components. | Science and technology | Giglio, M., Vergani, L. |
Mechanistic approach for creep-fatigue evaluation of 9Cr-1Mo-V-Nb steel. | Science and technology | Asada, Yasuhide, Yaguchi, Masatsugu |
Micromechanics modeling of electronic composites. | Science and technology | Taya, Minoru |
Mixed mode fracture toughness of engineering materials. | Science and technology | Kamat, S.V., Hirth, J.P. |
Modeling and numerical analysis of compression molding of three-dimensional thin parts with curing process. | Science and technology | T.H. Kwon, C.S. Kim |
Natural strain.(mapping in Cartesian space) | Science and technology | Freed, Alan D. |
Nonproportional low cycle fatigue criterion for type 304 stainless steel. | Science and technology | Itoh, Takamoto, Sakane, Masao, Ohnami, Masateru, Socie, Darrell F. |
On testing requirements for viscoplastic constitutive parameter estimation. | Science and technology | Senseny, P.E., Fossum, A.F. |
Plane-strain tension tests on aluminum alloy sheet. | Science and technology | Taha, Fadi, Graf, Alejandro, Hosford, William |
Polymeric composite tube fabrication. | Science and technology | Lehnhoff, Terry F., Kim, Byung Sun |
Residual stresses and fracture mechanics.(surface flaws in glass) | Science and technology | Cheng, Weili, Finnie, Iain |
Scaling of quasi-brittle fracture and the fractal question. | Science and technology | Bazant, Zdenek P. |
Shape of the free surfaces of the jet in mold casting numerical modeling experiments. | Science and technology | Gilotte, P., Huynh, L.V., Etay, J., Hamar, R. |
Shearographic and holographic assessment of defective laminates with bond-lines of different elasticities. | Science and technology | H.M. Shang, L.M. Tham, F.S. Chau |
Strain concentration calculation of fatigue. | Science and technology | Lin, E., Lin, Y., Ling, M. |
Strain-hardening and thermal-softening effects on shear angle prediction: new model development and validation. | Science and technology | Song, Xueshu |
Stresses induced in fiber-reinforced tubes due to changes in temperature and moisture. | Science and technology | Kim, Byung S., Lehnhoff, Terry F. |
The distribution of temperatures in a hot/cold die set: the effect of the pressure, temperature, and material. | Science and technology | Lenard, J.G., Davies, M.E. |
The importance of material structure in the laser cutting of glass fiber reinforced plastic composites. | Science and technology | Caprino, G., Tagliaferri, V., Covelli, L. |
The mechanical behavior of zinc during machining. | Science and technology | Stevenson, Robin, Stephenson, David A. |
Thermomechanical fatigue behavior of a quasi-isotropic SCS-6/Ti-15-3 metal matrix composite. | Science and technology | Mall, S., Hart, K.A. |
Thermoplastics as engineering materials: the mechanics, materials, design, processing link. | Science and technology | Stokes, Vijay K. |
The role of gas dissolution and induced crystallization during microcellular polymer processing: a study of poly(ethylene terephthalate) and carbon dioxide systems. | Science and technology | Baldwin, Daniel F., Shimbo, Minuro, Suh, Nam P. |
Universal bounds for overall properties of linear and nonlinear heterogeneous solids. | Science and technology | Nemat-Nasser, Sia, Hori, Muneo |
Viscoplastic model development with an eye toward characterization. | Science and technology | Walker, Kevin P., Freed, Alan D. |
Which elasticity tensors are realizable? | Science and technology | Milton, Graeme W., Cherkaev, Andrej V. |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible.