| Journal of Engineering Materials and Technology 1996 |
| Title | Subject | Authors |
|---|
| Accommodation of springback error in channel forming using active binder force control: numerical simulations and experiments. | Science and technology | Boyce, M.C., Cao, J., Sunseri, M., Karafillis, A.P. |
| A dislocation density based constitutive model for cyclic deformation. | Science and technology | Brechet, Y., Braasch, H., Estrin, Y. |
| A mechanical material model for aluminium extrusions during on-line quenching. | Science and technology | Jarvstrat, Niklas, Tjotta, Stig |
| A model for residual stress in the fabrication of thin glass films. | Science and technology | Murray, P.E. |
| Analysis and testing of dynamic micromechanical behavior of composite materials at elevated temperatures. | Science and technology | Pant, R.H., Gibson, R.F. |
| Analysis of layer waviness in flat compression-loaded thermoplastic composite laminates. | Science and technology | Adams, Daniel O'Hare, Hyer, Michael W. |
| Analysis of the failure of ceramics due to Subcritical Crack Growth. | Science and technology | Marquis, Didier, Hild, Francois, Kadouch, Olivier, Lambelin, Jean-Pierre |
| Analytical, numerical, and experimental studies of effective elastic properties of periodically perforated materials. | Science and technology | Yao, J., Meguid, S.A., Kalamkarov, A.L., Zougas, A. |
| An experimental investigation into the relationship between temperature-time history and surface roughness in the spray quenching of aluminum parts. | Science and technology | Bernardin, John D., Mudawar, Issam |
| An experimental study evaluating macroscopic cavity interactions as a model of microvoid ductility. | Science and technology | Geltmacher, A.B., Matic, P., Harvey, D.P., II |
| An investigation of necking instability in fiber reinforced polypropylene. | Science and technology | Lee, J.H., Vogel, J.H. |
| A probabilistic micromechanics model for damaged composites. | Science and technology | Duva, J. Mark, Aboudi, Jacob, Herakovich, Carl T. |
| A probabilistic treatment of microstructural effects on fatigue crack growth of large cracks. | Science and technology | Chan, K.S., Torng, T.Y. |
| Architecture of functionally graded ceramic coatings against surface thermal fracture. | Science and technology | Choules, B.D., Kokini, K. |
| ASME 1995 Nadai Lecture - plasticity of porous and particulate materials.(American Society of Mechanical Engineers) | Science and technology | Cristescu, N.D. |
| A state variable constitutive model for superelastic Ti-6Al-4V based on grain size. | Science and technology | Dawson, P.R., Mosher, D.A. |
| A study of kerf characteristics in abrasive waterjet machining of graphite/epoxy composite. | Science and technology | Ramulu, M., Arola, D. |
| A study of the dynamic behavior of elastomeric materials using finite elements. | Science and technology | Shukla, Arun, Vallee, G.E. |
| A study on the distribution of residual stress due to surface induction hardening. | Science and technology | Xu, Dong-hui, Kuang, Zhen-Bang |
| A two surface plasticity model with bounding surface softening. | Science and technology | White, C.S. |
| A unified approach to physically based weakest-link theories for multiaxial fracture of ceramics. | Science and technology | Furgiuele, Franco M., Luchi, M. Laura |
| Automated evaluation of material parameters of viscoplastic constitutive equations. | Science and technology | Schwertel, J., Schinke, B. |
| Behavior of a unidirectional metal-matrix composite under thermomechanical loading. | Science and technology | Daniel, Isaac M., Chun, Heoung-Jae |
| Burr/breakout model development and experimental verification. | Science and technology | Chern, Gwo-Lianq, Dornfeld, David A. |
| Carbide coarsening during creep in 12 percent CrMoV steel. | Science and technology | Sandstrom, Rolf, Wu, Rui |
| Comparison with experimental results.(Life Prediction Techniques for Variable amplitude Multiaxial Fatigue, part 2) | Science and technology | Brown, M.W., Wang, C.H. |
| Constitutive modeling of the visco-plastic response of Hastelloy-X and Aluminium alloy 8009. | Science and technology | Rowley, M.A., Thornton, E.A. |
| Correlation of tensile and bending strength of composites with a circular hole. | Science and technology | Yang, Chihdar, Pang, Su-Seng, Zhao, Yi |
| Creep in building stones under tensile conditions. | Science and technology | Sorace, S. |
| Cutting forces in orthogonal cutting of unidirectional GFRP composites.(glass fiber reinforced plastic) | Science and technology | Caprino, G., Nele, L. |
| Densification forming of alumina powder - effects of power law creep and friction. | Science and technology | Kim, K.T., Kwon, Y.S. |
| Design curve to characterize fatigue strength. | Science and technology | Shen, C.L., Wirsching, P.H., Cashman, G.T. |
| Determination of biaxial residual stresses by a holographic-hole drilling technique. | Science and technology | Makino, A., Nelson, D.V., Fuchs, E.A., Williams, D.R. |
| Determination of nonuniform residual stresses using the ring-core method. | Science and technology | Ajovalasit, A., Petrucci, G., Zuccarello, B. |
| Effect of architecture on the strength of braided tubes under biaxial tension and compression. | Science and technology | Swanson, S.R., Smith, L.V. |
| Effect of carbonization heating rate, microstructure, and lay-up on the interlaminar tensile properties of a two-dimensional carbon-carbon composite. | Science and technology | Anderson, David P., Roy, Ajit K. |
| Effect of stress ratio on short fatigue crack growth. | Science and technology | Wang, C.H. |
| Elastic response of flexible polyurethane foams in uniaxial tension. | Science and technology | El-Ratal, W.H., Mallick, P.K. |
| Energy criterion for fatigue strength of wood structural members. | Science and technology | Liu, Jen Y., Ross, Robert J. |
| Experiments of the ratchetting behavior of AISI 316L(N) austenitic steel at room temperature. | Science and technology | Schinke, B., Haupt, A. |
| Failure prediction for cross-rolled beryllium sheet material. | Science and technology | Roschke, P., Mascorro, E. |
| Fatigue crack growth properties of a cryogenic structural steel at liquid helium temperature. | Science and technology | Konosu, Shinji, Kishiro, Tomohiro, Ivano, Ogi, Nunoya, Yoshihiko, Nakajima, Hideo, Tsuji, Hiroshi |
| Fluid and matrix components of polyurethane foam behavior under cyclic compression. | Science and technology | Rehkopf, Jackie D., McNeice, Greg M., Brodland, G. Wayne |
| Generalization of the Coffin equations with respect to the effect of large mean plastic strain. | Science and technology | Skoczen, B. |
| High temperature densification forming of alumina powder - constitutive model and experiments. | Science and technology | Kim, K.T., Kwon, Y.S. |
| Holographic evaluation of edge delamination in bars bonded to a rigid support with foam-adhesive. | Science and technology | Shang, H.M., Qin, S., Giam, C.L., Tee, C.E. |
| Hydrogen embrittlement characterization by disk pressure tests: test analysis and application to high chromium martensitic steels. | Science and technology | Beghini, M., Benamati, G., Bertini, L. |
| Impact resistance and fracture toughness of vanadium-based microalloyed forging steel in the as-forged and Q&T conditions.(quenched and tempered) | Science and technology | Yang, L., Fatemi, A. |
| Influence of grinding direction on fracture strength of silicon nitride. | Science and technology | Strakna, T.J., Jahanmir, S., Allor, R.L., Kumar, K.V. |
| Influence of strain rate and temperature on the radial compression behavior of wet spruce. | Science and technology | Uhmeier, Andreas, Salmen, Lennart |
| Interactive growth of multiple fiber-bridged matrix cracks in unidirectional composites. | Science and technology | Huang, Y., Li, N.-Y., Zhang, H.W., K.-C. Hwang |
| Life prediction of notched specimens using multiaxial surface and subsurface strain analyses. | Science and technology | Smith, D.J., Shatil, G. |
| Localization and fracture criteria. (A Finite-Element Work-Hardening Plasticity Model of the Uniaxial Compression and Subsequent Failure of Porous Cylinders Including Effects of Void Nucleation and Growth, part 2) | Science and technology | Zhang, Y., Lee, J.H. |
| Measurement of residual stresses in a circular ring using the successive cracking method. | Science and technology | Kang, K.J., Seol, S.Y. |
| Measuring method for residual stresses in explosively clad plates and a method of residual stress reduction. | Science and technology | Ueda, Y., Murakawa, H., Ma, N.X. |
| Micromechanical analysis of dynamic behavior of conventional and negative Poisson's ratio foams. | Science and technology | Lakes, R.S., Chen, C.P. |
| Mixed-Mode fatigue crack growth in stainless steels under biaxial loading. | Science and technology | Cai-Fu Qian, Ming-O Wang, Bao-Juan Wu, Shu-Ho Dai, Li, J.C.M. |
| Nondestructive detection of damage produced by a sharp indenter in ceramics. | Science and technology | Ahn, Hyo-Sok, Wei, Lanhua, Jahanmir, Said |
| Nonlinear elastic behavior of unidirectional composites with fiber waviness under compressive loading. | Science and technology | Hsiao, H.M., Daniel, I.M. |
| Nonunique dynamic equilibrium constitutive relation of metal powder depending on its microstructure. | Science and technology | Sano, Yukio, Miyagi, Kiyohiro, Arathoon, Peter |
| On the constitutive response of 63/37 Sn/Pb eutectic solder. | Science and technology | Skipor, A.F., Harren, S.V., Botsis, J. |
| Optimization of the manufacturing process of a titanium aluminide metal matrix composite using a viscoplastic constitutive theory. | Science and technology | Sherwood, J.A., Quimby, H.M. |
| Overcoming limitations of the conventional strain-life fatigue damage model. | Science and technology | Vogel, J.H., Langlais, T.E. |
| Prediction of residual stresses in welded T- and I-joints using inherent strains. | Science and technology | Yuan, M.G., Ueda, Y. |
| Residual stress measurement in 304 stainless steel weld overlay pipes. | Science and technology | Hung-Ju Yen, Ching-Cheng Lin, Mark, Lih-Jin Chen |
| Response of resin transfer molded (RTM) composites under reversed cyclic loading. | Science and technology | Mahfuz, Hassan, Jeelani, Shaik, Haque, Anwar, Yu, Daixu |
| Role of welding parameters in determining the geometrical appearance of weld pool. | Science and technology | Kovacevic, R., Cao, Z.N., Zhang, Y.M. |
| Size effect and fracture characteristics of composite laminates. | Science and technology | Bazant, Zdenek P., Daniel, Isaac M., Li, Zhengzhi |
| Strain measurement in the wavy-ply region of an externally pressurized cross-ply composite ring. | Science and technology | Gascoigne, H.E., Abdallah, M.G. |
| Stress calculation error analysis for incremental hole-drilling residual stress measurements. | Science and technology | Schajer, G.S., Altus, E. |
| Stress-strain analysis of single-lap composite joints under tension. | Science and technology | Yang, Chihdar, Pang, Su-Seng |
| Surface strains due to face loading of a slot in a layered half-space. | Science and technology | Prime, M.B., Finnie, I. |
| Symmetric branching of mode II and mixed-mode fatigue crack growth in a stainless steel. | Science and technology | Cai-Fu Qian, Ming-O Wang, Bao-Juan Wu, Shu-Ho Dai, Li, J.C.M. |
| Tensile failure of stainless-steel notched bars under hydrogen charging. | Science and technology | Toribio, J., Valiente, A., Cortes, J., Caballero, L. |
| The effect of stress-state on the large strain inelastic deformation behavior of 304L stainless steel. | Science and technology | Miller, M.P., McDowell, D.L. |
| The influence of thermoplastic film interleaving on the interlaminar shear strength and mode I fracture of laminated composites. | Science and technology | Li, L., Liew, K.M., Lee-Sullivan, P. |
| Theories.(Life Prediction Techniques for Variable Amplitude Multiaxial Fatigue, part 1) | Science and technology | Brown, M.W., Wang, C.H. |
| The prediction of the flow stress of an extra-low carbon steel in the two-phase region using continuous cooling curves. | Science and technology | Lenard, J.G., Hwu, Yhu-Jen, Too, J.J.M. |
| Thermal phase transformation and residual stress estimation of multi-layer materials for cylindrical or flat shape. | Science and technology | Li, Ya Yun, Sheng, I-Ching, Liang, Shawn S. |
| Thermodynamic law of corresponding shock states in flexible polymeric foams. | Science and technology | Zaretsky, E., Ben-Dor, G. |
| Thermomechanical and isothermal fatigue behavior of bare and coated superalloys. | Science and technology | Sehitoglu, Huseyin, Kadioglu, Yavuz |
| Verification of a cohesive zone model for ductile fracture. | Science and technology | Yuan, Huang, Lin, Guoyu, Cornec, Alfred |
| Viscoplastic behavior of a notch root at 650 degrees celsius: ISDG measurement and finite element modeling.(Interferometric Stain/Displacement Gage) | Science and technology | Li, Keyu, Sharpe, William N., Jr. |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible.
