Abstracts - faqs.org

Abstracts

Engineering and manufacturing industries

Search abstracts:
Abstracts » Engineering and manufacturing industries

For large filter design

Article Abstract:

DGS Associates Inc's S/Filsyn 2.2 (digital filter section) provides techniques for the design, synthesis and analysis of practical high-order filters that meet detailed frequency-domain specifications. Segments of the $4,000 program support the development of infinite and finite impulse response filters in addition to an option using passband ripple, minimum stopband rejection and filter order. The program lets IIR filters be synthesized as cascaded second-order sections, as lattice filters or in terms of polynomial or partial-fraction expanded transfer-function form. It also lets FIR filters be factored into as many as five cascaded blocks and be designed using the McClellan-Parks-Rabiner algorithm or windowing techniques. The new release adds a menu-driven interface and an Extended Batch Language with example batch files for automating standard designs.

Author: Hench, David L.
Publisher: Institute of Electrical and Electronics Engineers, Inc.
Publication Name: IEEE Spectrum
Subject: Engineering and manufacturing industries
ISSN: 0018-9235
Year: 1991
Prepackaged software, Product information, Computer aided engineering, Evaluation, Software Packages, Digital Filters, Enhancements, Computer-Aided Engineering, DGS Associates Inc., S/Filsyn 2.2 (CAE software)

User Contributions:

Comment about this article or add new information about this topic:

CAPTCHA


Anatomy of a magnet failure

Article Abstract:

A site has been chosen, in Dallas TX, for a proposed superconducting super collider but at the same time the project has been plagued by rumors about problems with the prototype magnets for the accelerator. Testing of the prototypes has resulted in adequate performance from only two of the eight devices, while one failed catastrophically when a coil short-circuited. The failure was caused by an overabundance of insulation, an oversized pole spacer and possibly the improper positioning of insulation tape. The prototype magnet was tested in November 1987. The ultimate root of the failure may be attributed to a tendency to implement hasty solutions to problems in order to meet the constraints of a tight schedule and budget.

Publisher: Institute of Electrical and Electronics Engineers, Inc.
Publication Name: IEEE Spectrum
Subject: Engineering and manufacturing industries
ISSN: 0018-9235
Year: 1989
Commercial physical research, Tests, Magnetic devices, Design, Superconducting devices, Performance, Testing, Prototype, Failure Analysis, Superconductive Devices, Product Failures, technical

User Contributions:

Comment about this article or add new information about this topic:

CAPTCHA


Similar abstracts:
  • Abstracts: Air bag fatalities spur smarter designs. Showdown at Yucca Mountain. Chip making wet new world
  • Abstracts: Microbe separation targeted. Biotechnology unit launched. Develop effective environmental training
  • Abstracts: MSC-pal 2. VLSI: linking design and manufacturing
  • Abstracts: Digital audio tape for data storage. Magnetic megabits. You are there ... and in control
  • Abstracts: One congressman's day. HDTV displays in Japan: projection-CRT systems on top. An electronic 'human eye.' (current research in visual prosthesis)
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible.
Some parts © 2025 Advameg, Inc.