Journal of Engineering Materials and Technology 2000 |
Title | Subject | Authors |
A constitutive model for distributed microcracking in titanium matrix composite laminae. | Science and technology | Ball, D.L., Chan, W.S. |
An interdisciplinary framework for the design and life prediction of engineering systems. | Science and technology | Raj, Rishi |
An investigation of yield potentials in superplastic deformation.(Statistical Data Included) | Science and technology | Khraisheh, Marwan K. |
Anisotropic nonlinear kinematic hardening rule parameters from reversed proportional axial-torsional cycling.(Statistical Data Included) | Science and technology | Moosbrugger, J.C. |
A simple model for stable cyclic stress-strain relationship of type 304 stainless steel under nonproportional loading.(Statistical Data Included) | Science and technology | Itoh, Takamoto, Chen, Xu, Nakagawa, Toshimitsu, Sakane, Masao |
A study of burr formation processes using the finite elelment method: the influences of exit angle, rake angle, and backup material on burr formation processes, part II.(Statistical Data Included) | Science and technology | Park, I.W., Dornfeld, D.A. |
A study of burr formulation processes using the finite element method: part I.(Statistical Data Included) | Science and technology | Park, I.W., Dornfeld, D.A. |
Cold compaction of composite powders.(Statistical Data Included) | Science and technology | K.T. Kim, J.H.Cho, J.S. Kim |
Consistent and minimal springback using a stepped binder force trajectory and neural network control.(Statistical Data Included) | Science and technology | Cao, Jian, Kinsey, Brad, Solla, Sara A. |
Creep deformation and failure: effects of randomness and scatter. | Science and technology | Harlow, D.G., Delph, T.J. |
Creep rupture properties of high-temperature bainitic steels after weld repair. | Science and technology | Indacochea, J.E., Wang, G., Seshadri, R., Oh, Y.K. |
Cyclic deformation behavior and dislocation substructures of hexagonal Zircaloy-4 under out-of-phase loading.(Statistical Data Included) | Science and technology | Xiao Lin |
Damage of short-fiber-reinforced metal matrix composites considering cooling and thermal cycling. | Science and technology | Chuwei Zhou, Shang Yang, Daining Fang |
Densification behavior of ceramic powder under cold compaction.(Statistical Data Included) | Science and technology | K.T. Kim, S.W. Choi, H. Park |
Durability and damage development in woven ceramic matrix composites under tensile and fatigue loading at room and elevated temperatures.(Statistical Data Included) | Science and technology | Haque, a., Rahman, M. |
Effect of cycle history on thermomechanical fatigue response of nickel-base superalloys. | Science and technology | Arrell, D.J., Bressers, J., Timm, J. |
Effect of elastic accommodation on diffusion-controlled cavity growth in metals. | Science and technology | Zhang, J., Mohan, R., Brust, F.W. |
Effect of laser shock processing (LSP) on the fatigue resistance of an aluminum alloy.(Statistical Data Included) | Science and technology | Tang Yaxin, Zhang Yongkang, Zhang Hong, Yu Chengye |
Effect of plasma cutting on the fatigue resistance of Fe510 D1 steel.(Statistical Data Included) | Science and technology | Chiarelli, M., Lanciotti, A., Sacchi, M. |
Failure mechanisms of high temperature components in power plants. | Science and technology | Viswanathan, R., Stringer, J. |
Failure of a ductile adhesive layer constrained by hard adherends.(Statistical Data Included) | Science and technology | Ikeda, Toru, Yamashita, Akira, Lee, Deokbo, Miyazaki, Noriyuki |
Fatigue damage mechanisms of bridging fibers in titanium metal matrix composites.(Statistical Data Included) | Science and technology | Tamin, M.N., Ghonem, H. |
Fatigue life prediction of thick-section S2-glass/vinyl-ester composites under flexural loading.(Statistical Data Included) | Science and technology | Mahfuz, Hassan, Zaman, Kamruz, Haque, Anwarul, Foy, Costee, Mohamed, Hisham, Jeelani, Shaik |
Fracture static mechanisms on fatigue crack propagation in microalloyed forging steels.(Statistical Data Included) | Science and technology | Linaza, M.A., Rodriguez-Ibabe, J.M. |
High strain extension of open-cell foams.(Statistical Data Included) | Science and technology | Mills, N.J., Gilchrist, A. |
Identification of material constants of composite laminates using measured strains.(Statistical Data Included) | Science and technology | T.Y. Kam, C.H. Lin, W.T. Wang |
Inelastic anisotropy of Inconel 718: experiments and mathematical representation.(Statistical Data Included) | Science and technology | Iyer, Saiganesh K., Lissenden, Cliff J. |
Influence of heat treatment on the mechanical properties and damage development in a SiC/Ti-15-3 MMC.(Statistical Data Included) | Science and technology | Miller, David A., Lagoudas, Dimitris C. |
Integration of basic materials research into the design of cast components by a multi-scale methodology. | Science and technology | Gall, Ken, Horstemeyer, Mark F. |
Interfacial stresses and void nucleation in discontinuously reinforced composites.(Statistical Data Included) | Science and technology | Tszeng, T.C. |
Interlaminar fracture toughness of a graphite/epoxy multidirectional composite.(Statistical Data Included) | Science and technology | Yang, Z., Sun, C.T. |
Low-cycle fatigue of TiNi shape memory alloy and formulation of fatigue life. | Science and technology | Tobushi, Hisaaki, Nakahara, Takafumi, Shimeno, Yoshirou, Hashimoto, Takahiro |
Low cycle fatigue of unidirectional laminates: stress ratio effects. | Science and technology | Harik, V.M., Klinger, J.R., Bogetti, T.A. |
Low velocity impact and compression-after-impact response of Z-pin reinforced core sandwich composites. | Science and technology | Vaidya, U.K., Palazotto, A.N., Gummadi, L.N.B. |
Machining performance of PM material containing MnX additives. | Science and technology | Barnes, Stuart, Nash, Michael J., Lim, Moh H. |
Measurement of the axial residual stresses using the initial strain approach.(Statistical Data Included) | Science and technology | Cheng, Weili |
Mechanical properties of flat braided composites with a circular hole. | Science and technology | Ohki, Takeru, Ikegaki, Shinya, Kurasiki, Ken, Hamada, Hiroyuki, Iwamoto, Masaharu |
Microscopic damage mechanism of nickel-based superalloy inconel 738LC under creep-fatigue conditions.(Statistical Data Included) | Science and technology | Yamamoto, Masato, Ogata, Takashi |
Microstructural features resulting from isothermal and thermocyclic exposure of a thermal barrier coating. | Science and technology | Walter, Mark E., Onipede, Bolarinwa, Soboyejo, Wole, Mercer, Chris |
Modeling of irradiation embrittlement of reactor pressure vessel steels.(Statistical Data Included) | Science and technology | Mizuno, M., Murakami, S., Miyazaki, A. |
Model of grain deformation method for evaluation of creep life in in-service components.(Statistical Data Included) | Science and technology | Hyo-Jin Kim, Jae-Jin Jung |
Models for cyclic ratchetting plasticity-integration and calibration.(Statistical Data Included) | Science and technology | Ekh, Magnus, Johansson, Anders, Thorberntsson, Hans, Josefson, Lennart B. |
Multiaxial cyclic ratcheting in coiled tubing-- experimental program and model evaluation, part II.(Statistical Data Included) | Science and technology | Rolovic, Radovan, Tipton, Steven M. |
Multiaxial cyclic ratcheting in coiled tubing--theoretical modeling, part I. | Science and technology | Rolovic, Radovan, Tipton, Steven M. |
Numerical analysis of welding residual stress and its verification using neutron diffraction measurement.(Statistical Data Included) | Science and technology | Mochizuki, Masahito, Hayashi Makoto, Hattori, Toshio |
Numerical simulation of a heat-treated ring gear blank. | Science and technology | Mgbokwere, C., Callabresi, M. |
On the energy release rate of fatigued composites subjected to compressive overloads. | Science and technology | Pelegri, Assimina A., Kedlaya, Diwakar N. |
On the limit of surface integrity of alumina by ductile-mode grinding.(Statistical Data Included) | Science and technology | Zarudi, I., Zhang, L.C. |
On the nonuniform deformation of the cylinder compression test. | Science and technology | Fuh-Kuo Chen, Cheng-Jun Chen |
On void growth in elastic-nonlinear viscous solids under creep and cyclic creep conditions. | Science and technology | Mohan, R., Brust, F.W. |
Predictive modeling of the nonuniform deformation of the aluminum alloy 5182.(Statistical Data Included) | Science and technology | Bange, M.E., Beaudoin, A.J., Stout, M., Chen, S.R., MacEwen, S.R. |
Probabilistic mesomechanics for high cycle fatigue life prediction.(Statistical Data Included) | Science and technology | Tryon, Robert G., Cruse, Thomas A. |
Representing the effect of crystallographic texture on the anisotropic performance behaviour of rolled aluminum plate.(Statistical Data Included) | Science and technology | Miller, M.P., Barton, N.R. |
Residual stress reduction and fatigue strength improvement by controlling welding pass sequences.(Statistical Data Included) | Science and technology | Mochizuki, Masahito, Hattori, Toshio, Nakakado, Kimiaki |
Stastical considerations in the analysis of data from fatigue tests on delaminated cross-ply graphite/epoxy composites.(Statistical Data Included) | Science and technology | Saponara, Valeria La, Kardomateas, George A. |
Structural integrity of a standpipe component in a petrochemical catalytic cracking unit: part 1- assessment of creep rupture properties. | Science and technology | Bueno, Levi de O., Marino, Luiz, Serra, Flavio A.S., Gazini, Fernando T. |
Structural integrity of a standpipe component in a petrochemical catalytic cracking unit: part 2- assessment of embrittlement effects.(Statistical Data Included) | Science and technology | Bueno, Levi de O., Marino, Luiz, Serra, Flavio A.S., Gazini, Fernando T. |
Structural material trends in future power plants. | Science and technology | Hack, Horst |
Structure, mechanics and failure of stochastic fibrous networks: microscale considerations, part I. | Science and technology | Wang, C.W., Berhan, L., Sastry, A.M. |
Structure, mechanics and failure of stochastic fibrous networks: network simulations and application, part II. | Science and technology | Wang, C.W., Sastry, A.M. |
Study of surface residual stress by three-dimensional displacement data at a single point in hole drilling method.(Statistical Data Included) | Science and technology | Wu, Z., Lu, J. |
Tailoring the microstructure of a metal-reinforced ceramic matrix composite. | Science and technology | Sbaizero. O., Pezzotti, G. |
The deformation habits of compressed open-cell solid foams. | Science and technology | Wang, Y., Gioia, G., Cuitino, A.M. |
The effects of patch properties on the debonding behavior of patched beam-plates. | Science and technology | Karisson, A.M. |
The influence of intrinsic strain softening on strain localization in polycarbonate: modeling and experimental validation. | Science and technology | Govaert, L.E., Timmermans, P.H.M., Brekelmans, W.A.M. |
The linkage between microscopic cavitation damage and macroscopic crack growth. | Science and technology | Onck, P.R., Nguyen, B.-N., Giessen, E. van der |
Thermomechanical behavior and modeling between 350 C and 400 C of Zircaloy-4 cladding tubes from an unirradiated state to high fluence (0 to 85.10(sup)24nm(sup)-2, E>1MeV).(Statistical Data Included) | Science and technology | Schaffler, I., Geyer, P., Bouffioux, P., Delobelle, P. |
The use of refractory metals as high temperature structural materials.(Statistical Data Included) | Science and technology | Briant, C.L. |
Through-tool coolant drilling of aluminum/SiC metal matrix composite. | Science and technology | Barnes, Stuart, Pashby, Ian R. |
Uniaxial ratchetting of 316FR steel at room temperature- Part I: experiments.(Statistical Data Included) | Science and technology | Mizuno, M., Mima, Y., Abdel-Karim, M., Ohno, N. |
Uniaxial ratchetting of 316FR steel at room temperature- Part II: constitutive modeling and simulation.(Statistical Data Included) | Science and technology | Abdel-Karim, M., Ohno, N. |
Use of miniature specimens for creep-crack-growth testing. | Science and technology | Viswanathan, R., Jaske, Carl E. |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible.