Journal of Engineering Materials and Technology 2001 |
Title | Subject | Authors |
A constitutive description of aluminium-1% magnesium alloy deformed under hot-working conditions. | Science and technology | Cabrera, E.S. Puchi |
A finite element based die design algorithm for sheet-metal forming on reconfigurable tools. | Science and technology | Socrate, Simona, Boyce, Mary C. |
A general time dependent constitutive model: part II Application to a titanium alloy. | Science and technology | Saleeb, A.F., Arnold, S. M., Castelli, M.G. |
A general time dependent constitutive model: part I- theoretical developments. | Science and technology | Saleeb, A.F., Arnold, S. M. |
Analyses of contact pressure and stress amplitude effects on fretting fatigue life. | Science and technology | Iyer, K., Mall, S. |
Analysis and testing of indentation fracture behavior of piezoelectric ceramics under an electric field. | Science and technology | Shindo, Y., Oka, M., Horiguchi, K. |
Analytical and experimental studies of short-beam interlaminar shear strength of G-10CR glass-cloth/epoxy laminates at cryogenic temperatures. | Science and technology | Shindo, Y., Horiguchi, K., Wang, R. |
An experimental study of inhomogeneous cyclic plastic deformation. | Science and technology | Jiang, Yanyao |
An optimal container design for metal powder under hot isostatic pressing. | Science and technology | K.T. Kim, H. Park, S. H., Chung, K.D. Jeon, S.M. Hwang |
Application of the radial return method to compute stress increments from Mroz's hardening rule. | Science and technology | Tang, Sing C., Xia, Z. Cedric, Ren, Feng |
Assessment of sandwich beam in three-point bending for measuring adhesive shear modulus. | Science and technology | He, Jianmei, Martin Y. M. Chiang, Hunston, Donald L. |
A study of beta processing of Ti-6Al-4V: is it trivial? | Science and technology | Prasad, Y.V.R.K., Seshacharyulu, T., Medeiros, S.C., Frazier, W.G. |
A study of fundamental mechanisms of warp and recoil in hemming. | Science and technology | Zhang, Guohua, Wu, Xin, Hu, S. Jack |
A unified bifurcation analysis of sheet metal forming limits. | Science and technology | Zhu, Xinhai, Weinmann, Klaus, Chandra, Abhijit |
Computer identification of structural weaknesses in locally anisotropic polycrystalline materials. | Science and technology | Li, Xu-Dong |
Constitutive data for powder compaction modeling. | Science and technology | Sinka, I.C., Cocks, A.C.F., Tweed, J.H. |
Constitutive relations for inelastic deformation and damage accumulation in hard alpha titanium. | Science and technology | Chan, Kwai S. |
Creep relaxation of residual stresses around cold expanded holes. | Science and technology | A.A. Garcia-Granada, Lacarac, V.D., Holdway, P., Smith, D.J., Pavier, M.J. |
Cross-sectional mapping of residual stresses by measuring the surface contour after a cut. | Science and technology | Prime, M.B. |
Cryogenic fracture toughness determination of a structural of a structural alloy weldment by notch tensile measurement and finite element analysis. | Science and technology | Shindo, Y., Horiguchi, K., Mano, Y., Sugo, T. |
Design and operation of a droplet deposition system for freeform fabrication of metal parts. | Science and technology | A.A. Tseng, M.H. Lee, B. Zhao |
Determination of friction coefficient by employing the ring compression test. | Science and technology | Sofuoglu, Hasan, Gedikli, Hasan, Rasty, Jahan |
Double cantilever beam measurement and finite element analysis of cryogenic mode I interlaminar fracture toughness of glass-cloth/epoxy laminates. | Science and technology | Kudo, H., Shindo, Y., Horiguchi, K., R. Wang |
Effective models for prediction of springback in flanging. | Science and technology | Cao, Jian, Song, Nan, Qian, Dong, Wing Kam Liu, Li, Shaofan |
Effect of loading rate on fracture morphology in high strength ductile steel. | Science and technology | Venkert, A., Guduru, P.R., Ravichandran, G. |
Effects of some modeling parameters of finite element models of binder forming. | Science and technology | Chen, Kuo-Kuang, Sa, Chung-Yeh |
Efficient meshfree formulation for metal forming simulations. | Science and technology | Yoon, Sangpil, Cheng-Tang, Wu, Hui-Ping, Wang, Jiun-Shyan, Chen |
Experiments and numerical simulations on thin metallic plates subjected to an explosion. | Science and technology | Woznica, Krzysztof, Pennetier, Olivier, Renard, Jerome |
Failure analysis of tubular hydroforming. | Science and technology | Z.C. Xia |
Generation of cyclic stress-strain curves for sheet metals. | Science and technology | Zhao, K.M., Lee, J.K. |
Heat treatment of metal surfaces by a conformal electron beam. | Science and technology | Liu, Shengyi, Dougal, Roger A., Lyons, Jed S. |
Identification of hardening parameters of metals from spherical indentation tests. | Science and technology | Kucharski, S., Mroz, Z. |
Impact strength of high-density solid-state microcellular polycarbonate foams. | Science and technology | Bordia, Rajendra K., Barlow, Chris, Kumar, Vipin, Flinn, Brian, Weller, John |
Improvement of vibration damping capacity and fracture toughness in composite laminates by the use of polymeric interleaves. | Science and technology | Zhao, Hui, Gibson, Ronald F., Chen, Yu |
Improving formability in sheet metal stamping with active drawbead technology. | Science and technology | Bohn, M.L., Xu, S.G., Weinmann, K.J., Chen, C.C., Chandra, A. |
Influence of alpha casing on superplastic deformation of Ti-6Al-4V. | Science and technology | Patankar, S.N., Tan, M.J. |
In process control of strain in a stretch forming process. | Science and technology | Hardt, D.E., Norfleet, W.A., Valentin, V.M., Parris, A. |
Investigation of strain hardening in NiAl single crystals using three-dimensional FEA models. | Science and technology | Chulho Yang, Kumar, Ashok V. |
Material properties of aluminum alloy for accurate draw-bend simulation. | Science and technology | Zhao, K.M., Lee, J.K. |
Mechanics and Physics of brittle to ductile transitions in fracture. | Science and technology | Argon, A.S. |
Micromechanical approach of lamellar nano-composites: influence of the microstructure on the yield strength. | Science and technology | Krummeich, R., Sabar, H., Berveiller, M. |
Micro-structural analysis of chip formation during orthogonal machining of Al/SiCp composites. | Science and technology | Joshi, S.S., Ramakrishnan, N., Ramakrishnan, P. |
Mid-wall temperature in an eroded section of an austenitic superheater/reheater tube. | Science and technology | Zarrabi, Khosrow, Rose, Ian |
Mixed-mode failure of graphite/epoxy composites. | Science and technology | Seif, M.A., Shahjahan, M. |
Modeling cold-rolling processes of commercial twin roll cast aluminum alloys. | Science and technology | Puchi-Cabrera, E.S. |
Modeling studies to predict stresses in composite floor tubes of black liquor recovery boilers. | Science and technology | Sarma, Gorti B., Keiser, James R., Wang, Xun-Li, Swindeman, Robert W. |
Modified anisotropic Gurson yield criterion for porous ductile sheet metals. | Science and technology | Chien, W.Y., Pan, J., Tang, S.C. |
Multiaxial constitutive behavior of ferroelectrics materials. | Science and technology | Chen,Wei, Lynch, Christopher S. |
Near-net-shape forming of ceramic powder under cold combination pressing and pressureless sintering. | Science and technology | K.T. Kim, H.G. Kim, H.M. Lee |
Nonlinear kinematic hardening identification for anisotropic sheet metals with bending-unbending tests. | Science and technology | Brunet, M., Morestin, F., Godereaux, S. |
Off-axis torsion tests on tubular specimens of steel. | Science and technology | Takeda, Takenobu, Chen, Zhongchun |
On the mechanical threshold stress of aluminum: effect of the alloying content. | Science and technology | Puchi-Cabrera, Eli S., Villalobos-Guiterrez, Crisanto, Castro-Farinas, Gonzalo |
Optimal blank design of arbitrary shapes by the sensitivity method. | Science and technology | H.B. Shim, K.C. Son |
Optimum process design in sheet-metal forming with finite element analysis. | Science and technology | Huh, Hoon, Se-Ho, Kim |
Plasticity in the thickness direction of paperboard under combined shear and normal loading. | Science and technology | Stenberg, N., Fellers, C., Ostlund, S. |
Real-time process characterization of open die forging for adaptive control. | Science and technology | Nye, T.N., Elbadan, A.M., Bone, G.M. |
Residual stress measurement in spot welds and the effect of fatigue loading on redistribution of stresses using high sensitivity moire interferometry. | Science and technology | Khanna, Sanjeev K., Canlong He, Agrawal, Hari N. |
Sheet Forming Analysis based on improved contact searching algorithm and simple approach for contact force evaluation. | Science and technology | G.Y. Li, M.J. Tan, K.M. Liew, Z.H. Zhong |
Simulation of multipass welding with simultaneous computation of material properties. | Science and technology | Borjesson, Lars, Lindgren, Lars-Erik |
Spatial free plastic forming of slender parts - machine design, forming limits, and application. | Science and technology | Thalmair, M., Lippmann, H., Reigl, M. |
Stamping blank optimal layout and coil sitting widths for single and multiple blanks. | Science and technology | Nye, T.J. |
Stress and strain histories of multiple bending-unbending springback process. | Science and technology | Huang, H.M., Liu, S.D., Jiang, S. |
Stress-based forming limits in sheet-metal forming. | Science and technology | Stoughton, Thomas B. |
Stress relaxation behavior at high-tension bolted connections of stainless-steel plates. | Science and technology | Masayuki, Tendo, Kenji, Yamada, Yasumi, Shimura |
Superimposing ultrasonic waves on the dies in tube and wire drawing. | Science and technology | Siegert, Klaus, Ulmer, Jochen |
The effects of tooling imperfections on the initiation of wrinkling in finite element modeling of a deep drawing process. | Science and technology | Hematian, J., Wild, P.M. |
The modeling of unusual rate sensitivities inside and outside the dynamic stain aging regime. | Science and technology | Kwangsoo Ho, Krempl, Erhard |
Thermal damage in particulate-reinforced metal matrix composite. | Science and technology | Y.C. Zhou, S.G. Long, Z.P. Duan, Hashida, T. |
Three stages of fatigue crack growth in GFRP composite laminates. | Science and technology | Jie Tong |
Time model of rubber deformation. | Science and technology | Guen, J. Le, Thouverez, F., Demoulin, G., Jezequel, L. |
Transport in stochastic fibrous networks. | Science and technology | Sastry, A.M., X Cheng, Layton, B.E. |
Upsetting of cylinders: a comparison of two different damage indicators. | Science and technology | Ganser, H.P., Atkins, A. G., Kolednik, O., Fischer, F. D., Richard, O. |
Viscoplastic constitutive modeling of anisotropic damage under nonproportional loading. | Science and technology | Chow, C.L., Yang, X.J., Chu, Edmund |
Wire coating under vacuum. | Science and technology | Hade, Aaron J., Giacomin, A. Jeffrey |
Wrinkling limit in tube bending. | Science and technology | Cao, Jian, Wang, Xi |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible.