| Journal of Engineering Materials and Technology 2006 |
| Title | Subject | Authors |
|---|
| Actual safety distance and winding tension to manufacture full section parts by robotized filament winding. | Science and technology | Polini, W., Sorrentino, L. |
| Advanced composite panels for seismic and vibration mitigation of existing structures. | Science and technology | Aref, Amjad J., Woo-Young Jung |
| Analysis of shadow mask tension subjected to thermal and mechanical loads. | Science and technology | Y.H. Moon, D.I. Hyun, C.J. Van Tyne |
| An approximated harmonic balance method for nonlinear vibration of viscoelastic structures. | Science and technology | Boutyour, El Hassanl, Daya, El Mostafa, Azrar, Lahcen, Potier-Ferry, Michel |
| A phenomenological model for superelastic NiTi wires based on plasticity with focus on strain-rate dependency caused by temperature. | Science and technology | Schmidt, Ina |
| Application of EDM hole-drilling method to the measurement of residual stress in tool and carbon steels.(electrodischarge machining) | Science and technology | Hwa-Teng Lee, Mayer, Joachim, Hsu Fu-Chuan, Rehbach, Werner P., Weirich, Thomas, Dimyati, Arbi, Tzu-Yao Tai |
| Buckling analysis of multiwalled carbon nanotubes under torsional load coupling with temperature change. | Science and technology | Qiang Han, Xiaohu Yao |
| Characterization of multiaxial constitutive properties of rubbery polymers. | Science and technology | Chakkarapani, V., Ravi-Chandar, K., Liechti, K.M. |
| Combustion synthesis of a functionally graded NiTi-[TiC.sub.x] composite. | Science and technology | Moore, John J., Burkes, Douglas E. |
| Constitutive modeling of a thermoplastic olefin over a broad range of strain rates. | Science and technology | Yen Wang, Arruda, Ellen M. |
| Continuum and molecular-level modeling of fatigue crack retardation in self-healing polymers. | Science and technology | Kieffer, John, Maiti, Spandan, Shankar, Chandrashekar, Geubelle, Philippe H. |
| Creep-fatigue life evaluation for Sn-3.5Ag solder. | Science and technology | Sakane, Masao, Noszakl, Mineo, Tsukada, Yutaka, Nishlmura, Hideo |
| Creep-induced microstructural change in 304-type austenitic stainless steel. | Science and technology | Ohtani, Toshihiro, Ogl, Hirotsugu, Hirao, Masahiko |
| Creep rupture of multidirectional polymer composite laminates-influence of time-dependent damage. | Science and technology | Gupta, A., Birur, A., Raghavan, J. |
| Crystal plasticity based Fe model for understanding microstructural effects on creep and dwell fatigue inTi-6242. | Science and technology | Venkataramani, Gayathri, Deka, Dhyanjyoti, Ghosh, Somnath |
| Deformation and life estimates for a metal matrix-spherical particular subjected to thermomechanical loading. | Science and technology | McDonald, Russell J., Kurath, Peter |
| Design of sandwich panels with prismatic cores. | Science and technology | Zok, F.W., Wei, Z., Evans, A.G. |
| Determination of mode of damage during creep-fatigue interaction. | Science and technology | Hyder, Javed M. |
| Effect of cryogenic temperature on the fracture toughness of graphite/epoxy composites. | Science and technology | Kalarikkal, S.G., Sankar, B.V., Ifju, P.G. |
| Effect of H-doping on damping capacity of various NiTi-based alloys at kHz frequencies. | Science and technology | Coluzzi, A., Biscarini, A., Mazzolai, G., Mazzolai, F.M., Tuissi, A. |
| Effect of material anisotropy and curing stresses on interface delamination propagation characteristics in multiply laminated FRP composites. | Science and technology | Pradhan, Brajabandhu, Panda, Saroja Kanta |
| Effect of oxygen content on the processing maps for hot deformation of OFHC copper. | Science and technology | Prasad, Y.V.R.K., Rao, K.P. |
| Effect of Resin Formulation on thermoset viscoelasticity. | Science and technology | Jansen, K.M.B. |
| Effect of yield criterion on numerical simulation results using a stress-based failure criterion. | Science and technology | Sakash, Aaron, Moondra, Sumit, Kinsey, Brad L. |
| Effects of CO2 laser surface processing on fracture behavior of silicon nitride ceramic. | Science and technology | Li Sun, Malshe, Ajay P., Wenpiang Jiang, McCluskey, Philip H. |
| Experimentally evaluating the equilibrium stress in shear of glassy polycarbonate. | Science and technology | Negahban, Mehrdad, Goel, Ashwani, Dalabarre, Pierre, Ruqiang Feng, Dimick, Amy |
| Finite element analysis of adaptive-stiffening and shape-control SMA hybrid composites. | Science and technology | Gao, Xiujie, Burton, Deborah, Turner, Travis L., Brinson, L. Catherine |
| Fluid-Structure interaction analysis of flow-induced deformation in a two-phase, Neo-Hookean marine egg. | Science and technology | Sastry, A.M., T. Kim, C. W. Wang, Thomas, F.I.M. |
| Identification of small-sized cracks on cross-stiffened plate structures for ships. | Science and technology | Budipriyanto, A., Swamidas, A.S.J., Haddara, M.R. |
| Instrumented microindentation of nanoporous alumina films. | Science and technology | Gall, Ken, Liu, Yiping, Routkevitch, Dmitri, Finch, Dudley S. |
| Investigation into tangential force and axial stress effects on fretting fatigue behavior. | Science and technology | Lee, Hyukjae, Mall, Shankar |
| Large strain mechanical behavior of poly (methyl methacrylate) (PMMA) near the glass transition temperature.(Polymethyl methacrylate) | Science and technology | Castro, J., Palm, G., Dupaix, R.B. |
| Loading history effects on the creep and relaxation behavior of thermoplastics. | Science and technology | Khan, Fazeel |
| Localization, delocalization, and compression fracture in moderately thick transversely isotropic bilinear rings under external pressure. | Science and technology | Chaudhuri, Reaz A. |
| Local stress-ratio criterion for incremental hole-drilling measurements of shot-peening stresses. | Science and technology | Nobre, J.P., Dias, A.M., Kornmeler, M., Gibmeier, J. |
| Magnetorheological fluid behavior under constant shear rates and high magnetic fields over long time periods. | Science and technology | Yamamoto, Hideki, Ciocanel, Constantin, Molyet, Kevin, Vieira, Sheila L., Naganathan, Nagi G. |
| Material flow in FSW of AA7075-T6 butt joints: Continuous dynamic recrystallization of phenomena. | Science and technology | Fratini, L., Buffa, G., Palmeri, D. |
| Measurement and prediction of the residual stress field generated by side-punching. | Science and technology | Smith, D.J., Mahmoudi, A.H., Stefanescu, D., Hossain, S., Truman, C.E. |
| Mechanics of biomacromolecular networks containing folded domains. | Science and technology | Boyce, Mary C., Jerry Qi H., Ortiz, Christine |
| Micromechanical modeling of particulate composites for damping of acoustic waves. | Science and technology | Haberman, Michael R., Berthelot, Yves H., Cherkaoui, Mohammed |
| Modeling the Influence of drying conditions on the stress buildup during drying of paperboard. | Science and technology | Ostlund, Magnus |
| Modeling viscoelastic and viscoplastic behavior of high density polyethylene (HDPE). | Science and technology | Colak, Ozgen U., Dusunceli, Necmi |
| Multiscale thermodynamic significance of the scale invariance approach in continuum inelasticity. | Science and technology | W.Y. Zhou, X. Chen, Q. Yang |
| Nonlinear viscoelastic constitutive model for thermoset polymers. | Science and technology | Ellyin, Fernand, Zihui Xia |
| Nonlinear viscoelasticity and viscoplasticity of flax/polypropylene composites. | Science and technology | Marklund, Erik, Varna, Janis, Wallstrom, Lennart |
| Numerical and experimental evaluation of the damping properties of shape-memory alloys. | Science and technology | DesRoches, Reginald, Fugazza, Davide, Auricchio, Ferdinando |
| Optimal cool-Down in linear and nonlinear thermoviscoelasticity and the effects of initial stress. | Science and technology | L. Chen, J. Cao, Weitsman, Y.J |
| Partial hyperbolic-tangent friction element based phenomenological models for shape memory alloy pseudoelastic hysteretic. | Science and technology | Malovrh, Brendon, Gandhi, Farhan |
| Polycarbonate and a polycarbonate-POSS nanocomposite at high rates of deformation. | Science and technology | Boyce, M.C., Mulliken, A.D. |
| Relaxation of proton conductivity and stress in proton exchange membranes under strain. | Science and technology | Hickner, Michael A., Dan Liu, Case, Scott W., Lesko, John J. |
| Seismic vibration control using superelastic shape memory alloys. | Science and technology | McCormick, Jason, DesRoches, Reginald, Fugazza, Davide, Auricchio, Ferdinando |
| Shape memory alloys cyclic behavior: Experimental study and modeling. | Science and technology | Malecot, P., Lexcellent, C., Foltete, E., Collet, M. |
| Size effect on compressive strength of sandwich panels with fracture of woven laminate facesheet. | Science and technology | Bazant, Zdenek P., Qiang Yu, Bayldon, John, Daniel, Isaac M. |
| Size effect on strength of laminate-foam sandwich plates. | Science and technology | Bazant, Zdenek P., Yong Zhou, Qiang Yu, Daniel, Isaac M., Caner, Ferhun C. |
| Small amplitude dynamic properties of Ni(sub 48)Ti(sub 46)Cu(sub 6) SMA ribbons: Experimental results and modeling. | Science and technology | Remillat, C., Hassan, M.R., Scarpa. F. |
| Stress-strain-temperature behavior due to B2-R-B19' transformation in NiTi polycrystals. | Science and technology | Sittner, P., Novak, V., Lukas, P., Landa, M. |
| Theoretical and experimental studies for the application of shape memory allows in civil engineering. | Science and technology | Dolce, Mauro, Cardone, Donatello |
| The thermo-viscoelastic, viscoplastic characterization of Vetrotex 324/Derakane 510A-40 through [T.sub.g]. | Science and technology | Case, Scott W., Lesko, John J., Boyd, Steven E. |
| Uncertainty, model error, and order selection for series-expanded, residual-stress inverse solutions. | Science and technology | Hill, Michael R., Prime, Michael B. |
| Use of inverse solutions for residual stress measurements. | Science and technology | Prime, Michael B., Schajer, Gary S. |
| Using a dovetail fixture to study fretting fatigue and fretting palliatives. | Science and technology | Conner, B.P., Nicholas, T. |
This website is not affiliated with document authors or copyright owners. This page is provided for informational purposes only. Unintentional errors are possible.
